About The Brake System | Brake Service | Chevrolet Canada
About the Brake System
Most GM vehicles are equipped with disc brakes at all four wheels. Key disc brake components include:
A. Brake Pads — Brake pads are comprised of frictional material that presses against the rotor to slow and stop your vehicle.
B. Rotor — The rotor is a disc that rotates with the wheel. The brake pads press against the rotor to slow and stop the vehicle.
C. Brake Caliper — The brake caliper is a hydraulic clamp that presses the brake pads against the rotor.
Some GM vehicles feature disc brakes at the front wheels and drum brakes at the rear wheels. In a drum system, the drum rotates with the wheel. During braking, brake shoes press against the inside of the drum, creating friction, to slow and stop the vehicle.
Your brake system will need to be maintained throughout the life of your vehicle. There are no specific mileage intervals for brake service because brake wear varies depending on driving habits and conditions. That’s why at GM Dealerships your brakes are inspected during every Multipoint Inspection. Trained technicians will inspect your vehicle’s front and rear brake pads (or shoes), rotors, hoses and calipers for wear. They’ll also inspect fluid lines for cracks and leaks.
The brake pads in your brake system may feature Brake Wear Indicators that will alert you when service is necessary. The indicators are metal tabs built into the brake pads. When the pads wear to the point that the indicators are revealed, the tabs will rub against the rotors when the brakes are applied, emitting a chirping, squealing or whistling sound. When you hear any of these sounds, it’s time to get your brakes checked.
Your vehicle may also feature a Brake Pad Life Monitor that uses front and rear thickness sensors to estimate brake pad wear. When service is needed, it will display a message in the Driver Information Center.
Other signs your brakes may need service:
If you have any questions or concerns, ask the Certified Service Experts at your local dealer.
Yes. Pads with higher metal content will tend to operate with more abrasive friction, where hard metal particles in the pad interact directly with the brake rotor surface. Use of metallic pads will create more brake dust and will shorten the rotor life. Most GM vehicles in North America use non-asbestos organic pads (also known as ceramic pads). These pads develop a transfer film, which is a layer of material on the pad and rotor surface that acts as a cushion (at a microscopic scale) between the pad and rotor. This helps protect both from abrasive interaction that causes wear.
Communicate with one of our specialists.
To find out if your vehicle has this feature, contact your dealer or refer to your vehicle’s equipment list. Please check your Owner’s Manual for more information about features.
© General Motors of Canada Company
You are leaving chevrolet.ca
You are leaving chevrolet.ca to visit a website that is operated independently and not maintained by General Motors of Canada and where the General Motors of Canada privacy policy does not apply.
This link is provided to you for convenience and does not serve as an endorsement by General Motors of Canada of information or content that you may find on this site.
%20(1).png?imwidth=3000)
